Artificial Grass Home 
Installation Guide
Infill The Grass
Step
3: Infill the Grass
• Evenly
distribute the infill material over
the grass. The infill can be distributed
by using a drop spreader or broadcast
with a shovel. Begin brushing
the infill material into the grass against
the direction the fibers are laying
causing them to stand upright.
This process will be repeated several
times until the grass has been filled
approximately 1 1/2”. Infilling
the grass in layers will make the process
much easier. A power broom will
be used to evenly distribute the infill
material. A street broom can be
used for corners and small areas.
After you have leveled the infill material,
slightly water the grass to settle any
infill particles that may remain on
the surface.
•
Care
Periodically, brush the grass using
a push broom. This will help stabilize
the fibers, and keep the grass clean.
Any spills that occur can be cleaned
using a mild detergent and water.
A plastic leaf rake or leaf blower can
be used to remove any debris or foliage.
•
Step 1: Prepare the Base
•Step
2: Install the Grass
|
